Advertisement

Oil filtration and condition monitoring improve industrial gearbox reliability

BMG – the exclusive authorised distributor and service partner for Sumitomo Drive Technologies in South Africa and sub-Saharan Africa – combines filtration and monitoring for improved industrial gearbox reliability.

“The integration of oil filtration and condition monitoring reduces contamination-related wear and supports planned maintenance of industrial gearboxes,” explains Rudzani Ramuageli, BMG Divisional Director for Drives. “Oil is the lifeblood of a gearbox. Keeping it clean helps protect gears and bearings, while monitoring its condition gives maintenance teams an opportunity to respond before contamination leads to costly damage.

“The practical value of combining filtration and monitoring of industrial gearboxes is the ability to turn condition data into timely maintenance action. When technicians can interpret the trends and respond to alerts, they are better positioned to protect equipment availability and plan interventions.

“BMG displayed the Sumitomo Drive Technologies eye range at Electra Mining Africa 2026. The range comprises eye CLEAN for oil filtration, eye CONNECT for oil and vibration monitoring and eye COMPLETE, which combines the two functions. This system gives our customers a choice between targeted oil cleaning and an integrated maintenance solution.”

The mobile eye CLEAN unit uses three stages of filtration. A 125 µm inlet filter protects the pump from coarse particles, depth filters capture finer contaminants and remove water and a final surface filter at the outlet is available in 3, 5 or 10 µm ratings. The mobile unit circulates oil through a separate loop, allowing filtration, while a suitably connected gearbox remains in operation. The choice of filter depends on the target oil cleanliness, lubricant type and viscosity, as well as gearbox oil capacity and operating conditions.

Water contamination can compromise lubrication and promote corrosion. Combining depth and surface filtration helps control moisture and solid particles that would otherwise remain in circulation.

Eye CONNECT tracks oil temperature, relative humidity and particle contamination, reporting oil cleanliness using the ISO 4406 code. It also measures electrical conductivity and relative permittivity, which provide additional indications of changes in oil condition.

This system also analyses more than 50 vibration indicators in the time and frequency domains to help identify patterns associated with developing mechanical damage. The system processes the data locally and presents the results on local and cloud-based dashboards. Trends and automated alerts can prompt technicians to investigate a change before deciding when to intervene.

With eye COMPLETE, operators can follow oil and vibration trends together, while filtration is under way, helping them assess whether a change warrants closer investigation of the lubricant, mechanical wear or operating conditions.

Sumitomo engineers (André Sitzmann and Reza Golafshan, 2025) reported that the ISO 4406 cleanliness code improved from 19/16/13 to 14/12/10 over 17 months of eye CLEAN filtration. The Hansen P4 gearbox used in the study held approximately 400 litres of oil and was operating in a water-turbine application. The lower code indicated a reduction in particle contamination in that installation.

The study also reported approximately 36,000 hours of lubricant service, compared with an assumed normal life of 8,000 hours for the mineral oil. These findings illustrate the potential to extend oil-change intervals under suitable conditions. The achievable benefit depends on the lubricant, contamination load and application.

The decision to keep oil in service or replace it depends on its assessed condition, representative sampling and the gearbox manufacturer’s recommendations.

For operators, combining oil care with monitoring reduces unnecessary oil consumption and enables the efficient planning of maintenance around equipment condition.

Leave a Reply

Your email address will not be published. Required fields are marked *

mystake promo code